Best Quality CheckPoint 156-215.80 Exam Questions DumpsTests Realistic Practice Exams [2022]
Critical Information To Check Point Certified Security Administrator R80 Pass the First Time
Certification Path
The Check Point Certified Security Administrator (CCSA R80) 156-215.80 Exam certification path includes only one 156-215.80 certification exam.
Your Career Opportunities
The Check Point Certified Security Administrator is an amazing accomplishment that recognizes your ability to manage the Check Point products and services. On top of that, it will also qualify you for excellent job titles in the modern employment industry. It is even more satisfying to recall that all it takes to obtain such incredible opportunities is to pass one exam, known as the Check Point 156- According to the PayScale website, a typical CCSA certified individual earns an average salary of $85,216 annually. Here are the top job titles you can easily qualify for after acing this exam:
- Security Analyst;
- Systems Administrator;
- Network Engineer.
- Systems Engineer;
- Security Engineer;
Check Point Certified Security Administrator (CCSA R80) 156-215.80 Exam
Check Point Certified Security Administrator (CCSA R80) 156-215.80 Exam is related to Check Point Certified Security Administrator Certification.156-215.80 Exam validates the ability to install R80 Management, security in a distributed environment configure objects rules, settings to define a security policy, work with multiple concurrent administrators and define permission profiles. This exam also deals with the ability to configure a virtual private network, work with checkpoint clustering and perform periodic administrator tasks as specified in administrator job descriptions. Security Administrator and Check Point Professionals usually hold or pursue this certification and candidate can expect the same job roles after completion of this certification.
NEW QUESTION 32
Vanessa is attempting to log into the Gaia Web Portal. She is able to login successfully. Then she tries the same username and password for SmartConsole but gets the message in the screenshot image below.
She has checked that the IP address of the Server is correct and the username and password she used to login into Gaia is also correct.
What is the most likely reason?
- A. SmartConsole Authentication is not allowed for Vanessa until a Super administrator has logged in first and cleared any other administrator sessions.
- B. Check Point R80 SmartConsole authentication is more secure than in previous versions and Vanessa requires a special authentication key for R80 SmartConsole. Check that the correct key details are used.
- C. Authentication failed because Vanessa's username is not allowed in the new Threat Prevention console update checks even though these checks passed with Gaia.
- D. Check Point Management software authentication details are not automatically the same as the Operating System authentication details Check that she is using the correct details.
Answer: D
NEW QUESTION 33
ALPHA Corp has a new administrator who logs into the Gaia Portal to make some changes. He realizes that even though he has logged in as an administrator, he is unable to make any changes because all configuration options are greyed out as shown in the screenshot image below. What is the likely cause for this?
- A. The database is locked by another administrator SSH session.
- B. The IP address of his computer is not in the allowed hosts.
- C. The Gaia /bin/confdis locked by another administrator from a SmartConsole session.
- D. The Network address of his computer is in the blocked hosts.
Answer: A
Explanation:
Explanation/Reference:
Explanation: There is a lock on top left side of the screen. B is the logical answer.
NEW QUESTION 34
In which scenario is it a valid option to transfer a license from one hardware device to another?
- A. From a 4400 Appliance to an HP Open Server
- B. From an IBM Open Server to an HP Open Server
- C. From an 4400 Appliance to a 2200 Appliance
- D. From an IBM Open Server to a 2200 Appliance
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 35
John is the administrator of a R80 Security Management server managing r R77.30 Check Point Security Gateway. John is currently updating the network objects and amending the rules using SmartConsole. To make John's changes available to other administrators, and to save the database before installing a policy, what must John do?
- A. File > Save
- B. Logout of the session
- C. Publish the session
- D. Install database
Answer: C
Explanation:
Installing and Publishing
It is important to understand the differences between publishing and installing.
You must do this:
After you did this:
Publish
Opened a session in SmartConsole and made changes.
The Publish operation sends all SmartConsole modifications to other administrators, and makes the changes you made in a private session public.
Install the database
Modified network objects, such as servers, users, services, or IPS profiles, but not the Rule Base.
Updates are installed on management servers and log servers.
Install a policy
Changed the Rule Base.
The Security Management Server installs the updated policy and the entire database on Security Gateways (even if you did not modify any network objects).
NEW QUESTION 36
Which rule is responsible for the user authentication failure?
- A. Rule 3
- B. Rule 6
- C. Rule 4
- D. Rule 5
Answer: A
NEW QUESTION 37
Which Threat Prevention Profile is not included by default in R80 Management?
- A. Strict - Provides a wide coverage for all products and protocols, with impact on network performance
- B. Basic - Provides reliable protection on a range of non-HTTP protocols for servers, with minimal impact on network performance
- C. Recommended - Provides all protection for all common network products and servers, with impact on network performance
- D. Optimized - Provides excellent protection for common network products and protocols against recent or popular attacks
Answer: C
NEW QUESTION 38
Which Threat Prevention Profile is not included by default in R80 Management?
- A. Strict - Provides a wide coverage for all products and protocols, with impact on network performance
- B. Basic - Provides reliable protection on a range of non-HTTP protocols for servers, with minimal impact on network performance
- C. Recommended - Provides all protection for all common network products and servers, with impact on network performance
- D. Optimized - Provides excellent protection for common network products and protocols against recent or popular attacks
Answer: C
Explanation:
Explanation/Reference:
Reference: https://sc1.checkpoint.com/documents/R80/CP_R80BC_ThreatPrevention/html_frameset.htm?
topic=documents/R80/CP_R80BC_ThreatPrevention/136486
NEW QUESTION 39
When a Security Gateways sends its logs to an IP address other than its own, which deployment option is installed?
- A. Standalone
- B. Distributed
- C. Bridge
Answer: B
NEW QUESTION 40
Which of the following is NOT a VPN routing option available in a star community?
- A. To satellites through center only
- B. To center, or through the center to other satellites, to Internet and other VPN targets
- C. To center only
- D. To center and to other satellites throughcenter
Answer: A,C
Explanation:
SmartConsoleFor simple hubs and spokes (or if there is only one Hub), the easiest way is to configure a VPN star community in R80 SmartConsole:
The two Dynamic Objects (DAIP Security Gateways) can securely route communication through the Security Gateway with the static IP address.
NEW QUESTION 41
Full synchronization between cluster members is handled by Firewall Kernel. Which port is used for this?
- A. TCP port 265
- B. TCP port 256
- C. UDP port 265
- D. UDP port 256
Answer: A
NEW QUESTION 42
When a packet arrives at the gateway, the gateway checks it against the rules in the top Policy Layer,
sequentially from top to bottom, and enforces the first rule that matches a packet. Which of the following
statements about the order of rule enforcement is true?
- A. If the Action is Accept, the gateway continues to check rules in the next Policy Layer down.
- B. If the Action is Accept, the gateway allows the packet to pass through the gateway.
- C. If the Action is Drop, the gateway continues to check rules in the next Policy Layer down.
- D. If the Action is Drop, the gateway applies the Implicit Clean-up Rule for that Policy Layer.
Answer: A
NEW QUESTION 43
In which VPN community is a satellite VPN gateway not allowed to create a VPN tunnel with another satellite VPN gateway?
- A. Star
- B. Pentagon
- C. Meshed
- D. Combined
Answer: A
Explanation:
VPN communities are based on Star and Mesh topologies. In a Mesh community, there are
VPN connections between each Security Gateway. In a Star community, satellites have a
VPN connection with the center Security Gateway, but not to each other.
NEW QUESTION 44
You are going to perform a major upgrade. Which back up solution should you use to ensure your database can be restored on that device?
- A. logswitch
- B. backup
- C. snapshot
- D. Database Revision
Answer: C
Explanation:
Explanation
The snapshot creates a binary image of the entire root (lv_current) disk partition. This includes Check Point products, configuration, and operating system.
Starting in R77.10, exporting an image from one machine and importing that image on another machine of the same type is supported.
The log partition is not included in the snapshot. Therefore, any locally stored FireWall logs will not be saved.
NEW QUESTION 45
Examine the following Rule Base.
What can we infer about the recent changes made to the Rule Base?
- A. Rule 7 was created by the 'admin' administrator in the current session
- B. 8 changes have been made by administrators since the last policy installation
- C. Rule 1 and object webserver are locked by another administrator
- D. The rules 1, 5 and 6 cannot be edited by the 'admin' administrator
Answer: C
Explanation:
Explanation
On top of the print screen there is a number "8" which consists for the number of changes made and not saved.
Session Management Toolbar (top of SmartConsole)
References:
NEW QUESTION 46
View the rule below. What does the lock-symbol in the left column mean? Select the BEST answer.
- A. The current administrator has read-only permissions to Threat Prevention Policy.
- B. Another user has locked the rule for editing.
- C. The current administrator is logged in as read-only because someone else is editing the policy.
- D. Configuration lock is present. Click the lock symbol to gain read-write access.
Answer: B
Explanation:
Explanation/Reference:
Explanation: Administrator Collaboration
More than one administrator can connect to the Security Management Server at the same time. Every administrator has their own username, and works in a session that is independent of the other administrators.
When an administrator logs in to the Security Management Server through SmartConsole, a new editing session starts. The changes that the administrator makes during the session are only available to that administrator. Other administrators see a lock icon on object and rules that are being edited.
To make changes available to all administrators, and to unlock the objects and rules that are being edited, the administrator must publish the session.
Reference: https://sc1.checkpoint.com/documents/R80/CP_R80_SecMGMT/html_frameset.htm?
topic=documents/R80/CP_R80_SecMGMT/124265
NEW QUESTION 47
Harriet wants to protect sensitive information from intentional loss when users browse to a specific URL:
https://personal.mymail.com, which blade will she enable to achieve her goal?
- A. Application Control
- B. SSL Inspection
- C. DLP
- D. URL Filtering
Answer: C
Explanation:
Explanation/Reference:
Explanation: Check Point revolutionizes DLP by combining technology and processes to move businesses from passive detection to active Data Loss Prevention. Innovative MultiSpect⢠data classification combines user, content and process information to make accurate decisions, while UserCheck⢠technology empowers users to remediate incidents in real time. Check Point's self-educating network- based DLP solution frees IT/security personnel from incident handling and educates users on proper data handling policies-protecting sensitive corporate information from both intentional and unintentional loss.
Reference: https://www.checkpoint.com/downloads/product-related/datasheets/DLP-software-blade- datasheet.pdf
NEW QUESTION 48
You have enabled "Full Log" as a tracking option to a security rule. However, you are still not seeing any data type information. What is the MOST likely reason?
- A. Identity Awareness is not enabled.
- B. Logging has disk space issues. Change logging storage options on the logging server or Security Management Server properties and install database.
- C. Logs are arriving from Pre-R80 gateways.
- D. Data Awareness is not enabled.
Answer: B
Explanation:
Explanation/Reference:
Explanation:
The most likely reason for the logs data to stop is the low disk space on the logging device, which can be the Management Server or the Gateway Server.
NEW QUESTION 49
What are the three components for Check Point Capsule?
- A. Capsule Workspace, Capsule Docs, Capsule Cloud
- B. Capsule Workspace, Capsule Cloud, Capsule Connect
- C. Capsule Docs, Capsule Cloud, Capsule Connect
- D. Capsule Workspace, Capsule Docs, Capsule Connect
Answer: A
Explanation:
Explanation
Explanation/Reference: https://www.checkpoint.com/products-solutions/mobile-security/check-point-capsule/
NEW QUESTION 50
When configuring LDAP User Directory integration, Changes applied to a User Directory template are:
- A. Not reflected for any users who are using that template.
- B. Not reflected for any users unless the local user template is changed.
- C. Reflected for all users who are using that template and if the local user template is changed as well.
- D. Reflected immediately for all users who are using template.
Answer: D
Explanation:
Explanation
Explanation:
The users and user groups are arranged on the Account Unit in the tree structure of the LDAP server. User management in User Directory is external, not local. You can change the User Directory templates. Users associated with this template get the changes immediately. You can change user definitions manually in SmartDashboard, and the changes are immediate on the server.
Reference: https://sc1.checkpoint.com/documents/R77/CP_R77_SecurityManagement_WebAdminGuide/ html_frameset.htm?topic=documents/R77/CP_R77_SecurityManagement_WebAdminGuide/94041
NEW QUESTION 51
Where can you trigger a failover of the cluster members?
Log in to Security Gateway CLI and run command clusterXL_admin down.
In SmartView Monitor right-click the Security Gateway member and select Cluster member stop.
Log into Security Gateway CLI and run command cphaprob down.
- A. 1, 2, and 3
- B. 2 and 3
- C. 1 and 2
- D. 1 and 3
Answer: C
Explanation:
Explanation
How to Initiate Failover
NEW QUESTION 52
Which tool CANNOT be launched from SmartUpdate R80?
- A. cpinfo
- B. snapshot
- C. IP Appliance Voyager
- D. GAiA WebUI
Answer: B
NEW QUESTION 53
......
156-215.80 EXAM DUMPS WITH GUARANTEED SUCCESS: https://pass4sure.dumpstests.com/156-215.80-latest-test-dumps.html