Jun-2026 Free NACE-CIP2-001 Test Questions Real Practice Test Questions
NACE-CIP2-001 Dumps Updated Jun 03, 2026 WIith 100 Questions
Achieving the NACE-CIP2-001 certification demonstrates a high level of expertise in the coatings industry and can lead to greater opportunities for career advancement. Certified coating inspectors are often sought after by companies in a variety of industries, including oil and gas, construction, and manufacturing. They may also be eligible for higher salaries and increased job security.
NACE-CIP2-001 Certification Exam is intended for individuals who have already completed the Coating Inspector Level 1 certification and have at least two years of experience in the field of coating inspection. NACE-CIP2-001 exam covers a wide range of topics, including surface preparation, coating application, coating inspection, and coating testing. NACE-CIP2-001 exam also covers various types of coatings, such as protective coatings, marine coatings, and industrial coatings. NACE-CIP2-001 exam is designed to test the candidate’s knowledge and understanding of coating inspection principles, as well as their ability to apply this knowledge in practical situations.
NACE-CIP2-001 Coating Inspector Level 2 exam is a certification program offered by the National Association of Corrosion Engineers (NACE). NACE-CIP2-001 exam is designed to assess the knowledge and skills of individuals who are responsible for inspecting and evaluating coating systems in various industries, such as oil and gas, marine, and construction.
NEW QUESTION # 40
When ASIN D 3363 is specified the Inspector must:
- A. Use the correct solvent
- B. Record the percentage of failure
- C. Record the two end points identified in the standard
- D. Record the highest value attained
Answer: C
NEW QUESTION # 41
Linings are used on the interior of pipelines to
- A. protect the transported product.
- B. provide protection against soil chemicals.
- C. afford limited temperature insulation.
- D. reduce magnetic polarity.
Answer: A
NEW QUESTION # 42
In the event of a conflict between the Product Data Sheet and the Specification:
- A. It is up to the Applicator to decide which one to follow
- B. The Specification prevails
- C. The Product Data Sheet prevails
- D. It is up to the Inspector to decide which one to follow
Answer: B
NEW QUESTION # 43
The solvent sensitivity/solvent wipe test (ASTM D4752) is used to determine the cure of
- A. inorganic zincs.
- B. powder coatings.
- C. epoxies.
- D. urethanes.
Answer: A
NEW QUESTION # 44
All of these are advantages of using repair patches EXCEPT
- A. special tools or equipment are required.
- B. excellent abrasion resistance.
- C. barrier to moisture and corrosion.
- D. inert to common acids, alkalis, and solvents.
Answer: A
NEW QUESTION # 45
The number of air turns in an enclosure can be affected by all of these EXCEPT
- A. time of the year (winter/summer).
- B. type of dehumidification equipment (refrigerant or desiccant).
- C. manufacturer of the equipment.
- D. coating type.
Answer: D
NEW QUESTION # 46
From a corrosion perspective, the main difference between Ferrous and Non-Ferrous Metals is:
- A. Appearance
- B. Iron content
- C. Cost
- D. Safety
Answer: B
NEW QUESTION # 47
When working with someone who is very concerned about Stability and maintaining adherence to the status-quo, the Inspector should try to:
- A. Challenge their value to the team and try to get them out of their comfort zone
- B. Give them as much advance notice as possible about upcoming changes
- C. Make sure they are the center of attention in all site meetings
- D. Implement immediate to get them motivated
Answer: B
NEW QUESTION # 48
Dehumidification is defined as the removal of moisture vapor from the air to
- A. lower its dew point,
- B. lower its temperature
- C. provide worker comfort.
- D. raise its relative humidity.
Answer: A
NEW QUESTION # 49
Which is used to calibrate a pH meter?
- A. Standard solvent solution
- B. Deionized water
- C. Standard buffer solution
- D. Distilled water
Answer: C
NEW QUESTION # 50
Pre-cleaning of work pieces will NOT remove
- A. mill scale.
- B. snow, ice or water.
- C. dirt.
- D. oil or grease.
Answer: A
NEW QUESTION # 51
Thermal Spray coatings provide:
- A. Barrier protection
- B. Sacrificial protection
- C. Inhibitive protection
- D. Thermal protection
Answer: B
NEW QUESTION # 52
Which standards are generally established by private-sector bodies and are available for use by any person or Organization, private or government?
- A. Mandatory
- B. Consensus
- C. De facto
- D. Voluntary
Answer: D
NEW QUESTION # 53
An Inspection and Test Plan is required when:
- A. When the Inspector requests one
- B. When the Coating Applicator requests one
- C. When the Owner specifies one
- D. It is always required
Answer: D
NEW QUESTION # 54
You are working as the only in-house NACE Level 2 Inspector in a shop setting when an independent 3 rd party NACE Level 3 Inspector, representing the owner, presents you with a copy of a Non Conformance Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast which you had previously approved.
Your FIRST preferred course of action is to:
- A. Verbally challenge the NCR
- B. Consult your supervisor
- C. Request a re-blast of the item in question
- D. Review the NCR with the other Inspector
Answer: B
NEW QUESTION # 55
The standards defining surface cleanliness achieved by centrifugal blast cleaning are:
- A. The same as air blast cleaning
- B. Comparable to air blast cleaning
- C. Different than air blast cleaning
- D. Slightly different to air blast cleaning
Answer: A
NEW QUESTION # 56
A reinforced coating is
- A. equally resistant to abrasion and impact as a non-reinforced coating.
- B. less resistant to movement, abrasion, and impact than a non-reinforced coating.
- C. more resistant to movement, abrasion, and impact than a non-reinforced coating.
- D. equally resistant to movement and impact as a non-reinforced coating.
Answer: C
NEW QUESTION # 57
The coating applicator has ignored a enface preparation hold point and applied coating over the surface without a sign off from you as the inspector.
Your FIRST preferred course of action is to:
- A. Ignore the situation
- B. Require the Applicator to remove the coating
- C. Advise the Owner and write a Non-Conformance report
- D. Stop the job
Answer: B
NEW QUESTION # 58
Application of Thermal Spray Coatings requires:
- A. The same skills as welding
- B. The same skills as liquid coatings
- C. No particular skills
- D. Specialized skills supported by training and experience
Answer: D
NEW QUESTION # 59
The best choice of instrument for holiday testing of thick film concrete coatings is:
- A. High Voltage DC Constant Current
- B. High Voltage AC
- C. High Voltage DC Pulse Type
- D. Low Voltage Sponge Type
Answer: A
NEW QUESTION # 60
Which type of pipelines collect the gas from the transmission system so utility companies can distribute the gas to end users?
- A. Distribution
- B. Midstream
- C. Transmission
- D. Gathering
Answer: A
NEW QUESTION # 61
The most likely area of failure on a buried external pipeline coating is the:
- A. Field joint coating
- B. Ground bed
- C. Areas exposed to Ultra Violet light
- D. Mainline coating
Answer: A
NEW QUESTION # 62
When observing design defects the NACE Inspector should:
- A. Ignore the defect as the inspector can't change the design
- B. Request that the item be rebuilt with a better design for coating
- C. Stop the job immediately
- D. Document the defect and the potential problems that could result
Answer: D
NEW QUESTION # 63
......
View All NACE-CIP2-001 Actual Free Exam Questions Updated: https://pass4sure.dumpstests.com/NACE-CIP2-001-latest-test-dumps.html